Rulex RM22 Flash File SPD6531 1000% Working

In this post, you will get the Rulex RM22 Flash File direct link to download on your PC/Laptop. You will download Firmware zip file, which contains Flash File, Flash Tool, USB Driver and How-to Flash Manual. You will also learn, how to install Firmware file on your windows manually. We always advice you before start you must create a backup of your mobile phone device.

Here we are going to share with you, Rulex RM22 stock firmware for flashing your phone. It will also help you to re-install the Stock Firmware (flash file) on your phone. You can also install this firmware zip file when you are facing Software Issue, Bootloop Issue and much more. It will also help you for IMEI Issue or Dead Issue. You may also repair your 5Star keypad mobile phone using Stock ROM Flash File Firmware.

 

Rulex RM22 Flash File SPD6531 1000% Working

 

Software details

Operation : Read Flash [ v2.51 ]
1. Power off mobile
2. Press the Boot Key or use Boot Cable
3. Insert cable and battery in device!
Wait for device
Device Connected!
Boot-Version: SPRD3
Boot-Source: Internal-Library
Boot-Version: Spreadtrum Boot Block version 1.2
Port speed: 921600
FDL Flash -Control transfered
Boot Done!
CS0-MEM : SPI : [WINBOND] : W25Q32 : 0x0000400000 [ 4MB ]
Read Flash Ok, Size: 4.00 MB
Platform Version: MOCOR_12C.W13.04.14_Release
Project Version: D399_PCB_V1.1_SJ15_GIVA-SW_V1.0
HW Version: D399_PCB_V1.1_SJ15_GIVA-SW_V1.0
Saved to : C:\Users\Desktop\PC2\Rulex RM22\D399_PCB_V1.1-SJ15_GIVA_SW_V1.0.bin
Done!
Elapsed: 00:01:07


 

Download Rulex RM22 Flash File 100% Tested

  • File Name: Rulex RM22
  • File Type: BIN
  • Processor: SCR6531
  • File Size: 4MB

You have to wait 15 seconds.

.


 

How to Flash

Following below steps to flash your Rulex RM22 mobile phone using CM2/Miracle or other’s flash tools. Also We have shared a short tutorial of Miracle Thunder Tool.
  • Download and extract the Rulex RM22 flash file on your computer.
  • Install the USB Driver on your computer.
  • Lunch tool on your PC screen
  • Select SPD Choose 6631
  • Add file on the tool Click the Start button.
  • Connect your device to computer via USB cable
  • Insert battery in mobile.
That’s it, guys. We hope that you’ve installed the Rulex RM22 Stock Firmware on your Firmware device successfully. And, if we don’t work with this guide. Then do it in the comments section below
Next Post Previous Post